Table of Contents
Advertisement
For detailed information about configuring and managing the VPN Router 600,
refer to the documentation on the VPN Router software CD.
Testing the configuration
After you assign a management IP address to the VPN Router 600, start your Web
browser to verify that you can access the gateway from the browser.
To manage the VPN Router 600 using the graphic user interface (GUI), your PC
must be running one of the following browsers:
•
•
•
To test the management IP address on the VPN Router 600:
1
2
Windows 2000 and NT
— Internet Explorer 6.0 or later
— Mozilla 1.7 or later
— Firefox (all versions)
— Netscape 7.x, 8.0.x or 8.1.x
Unix
— Firefox 1.5 or later
— Mozilla 1.7 or later
Linux
— Firefox 1.5 or later
— Mozilla 1.7 or later
Open a Web browser.
In the URL field, enter http:// followed by the management IP address that
you assigned to the VPN Router 600.
For example, if the management IP address is 10.2.3.2, enter http://10.2.3.2.
If the Welcome screen appears, you correctly configured the management IP
address for the VPN Router 600.
Note: If the Welcome screen does not appear, see
page
50.
Chapter 3 Configuring the management IP interface 49
Nortel VPN Router Installation — VPN Router 600
"Troubleshooting" on
Advertisement
Table of Contents
