Ers 5000 Series Installation - Nortel BayStack 5520-48T-PWR Install Manual

2
Figure 8
Ethernet Routing Switch 5600 Series package contents
Copyright © 2008–2009 Nortel Networks
1. Nortel Ethernet Routing Switch 5500 Series
2. Rack-mounting hardware that includes:
— Rack-mount brackets - The Nortel Ethernet Routing
Switch 5530-24TFD offers 24 inch rack mounting
brackets.
— Screws for attaching brackets to the switch
— Screws for attaching the switch to the equipment rack
3. Stacking cable
4. Rubber footpads
5. AC power cord
6. Documentation
Figure 8 "Ethernet Routing Switch 5600 Series package
contents" (page 65) shows the components included with each
switch in the 5500 Series. Compare package contents with
those shown and listed below to verify all components have
been delivered. Should any components be missing, contact the
vendor from which the switch was purchased.
1. Nortel Ethernet Routing Switch 5600 Series
2. Rack-mounting hardware that includes:
— Rack-mount brackets (two for a 19-inch equipment rack
and two for a 23-inch equipment rack)
— Screws for attaching brackets to the switch
— Screws for attaching the brackets to the equipment rack
3. Stacking cable
4. Rubber footpads

ERS 5000 Series Installation

NN47200-300 04.03
13 April 2009
Installation preparation 65