Grandstream Networks HT812 Administration Manual page 5

Check the package before installation. If you find anything missing, contact your system administrator.
HT812/HT814 Ports Description
The following figure describes the different ports on the back panel of the HT812/HT814.
Figure 3: HT812 Back Panel
Phone 1 & 2 (HT812)
Phone 1,2,3 & 4 (HT814)
WAN
LAN
DC Power
Reset
Connecting HT812/HT814
The HT812/HT814 are designed for easy configuration and easy installation, to connect your HT812/HT814, please follow the
steps below:
Scenario 1: Connecting the HT812/HT814 using WAN Port
Figure 2: HT814 Package Contents
Connects the analog phones / fax machines to the ATA using an RJ-11 telephone cable.
Connects the ATA to your router, switch or modem using an Ethernet RJ45 network cable.
co
Connects the ATA to your PC or switch using an Ethernet RJ45 network cable.
Connects the ATA to PSU
(12V – 0.5A for HT812) and (12V – 1A for HT814).
Factory reset button. Press for 7 seconds to reset factory default settings.
Table 3: HT812/HT814 Connectors Definitions
Figure 4: HT814 Back Panel