Grandstream Networks HT812 Administration Manual page 14

Networ
Indicates the Status of the Network cables connected to the LAN Port and the WAN Port.
k Cable
Status (Up/Down), Speed (Mbps), Operational Mode (Full/Half Duplex)
Status
PPPoE
Indicates PPPoE connection status.
Link Up
NAT Indicates type of NAT when it is configured.
Displays relevant information regarding the FXS ports about their registration, current
Port
Status
status and their appropriate User ID.
Port
Displays relevant information regarding the FXS ports about their DND and call forward features.
Options
Download, Preview. Or, Delete call history records from the web GUI. Only the last 1000 records will be
CDR File
available.
Download, Preview or, Delete locally stored SIP trace.
SIP File
Note: "Send SIP Log" must be enabled to be able to capture the trace.
Provisio
Displays provisioning status.
n
Core
Provides generated core dump file if unit malfunctions. Clean will be displayed if no issues.
Dump
Basic Settings Page Definitions
Basic Settings
New End User Password
Confirm End User Password
New Viewer Password
Confirm Viewer Password
Web Session Timeout
Web Access Attempt Limit
Lockout time interval
Table 6: Status Page Definitions
Configures user level password. Case sensitive and max. Length of 25 characters.
Note : The new Password must contain 8-20 characters, at least one number, one
uppercase, and a lowercase letter. Purposely not displayed for security reasons.
Re-enter the end user password to confirm change user password on web GUI to
avoid typo or mistakes.
Configures viewer-level password. Case sensitive and max. length of 25 characters.
Note : The new Password must contain 8-20 characters, at least one number, one
uppercase, and a lowercase letter. Purposely not displayed for security reasons.
Re-enter the viewer password to confirm change viewer password on web GUI to
avoid typo or mistakes.
Configure timer to logout web session during idle. Default is 10 min. Range is 2-60
min.
Configure attempt limit before lockout. Default is 5. Range is 1-10.
If login attempt failed 5 times, login would be locked out for the time length. (Default