Grandstream Networks HT812 Administration Manual page 20

SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key Password
Custom Certificate
(Private Key + Certificate)
Gen-2 EC private key
Enable TR-069
TR-069 firewall rules
ACS URL
ACS Username
ACS Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request Username
Connection Request Password
Connection Request Port
CPE SSL Certificate
CPE SSL Private Key
Enable SNMP
SNMP Version
SNMP Port
SNMP Trap IP Address
SNMP Trap port
SNMP Trap Version
Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT8xx has
built-in private key and SSL certificate.
Maximum supported length is 4069.
Specifies TLS private key used for SIP over TLS is in X.509 format.
Maximum supported length is 4069.
Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Allows users to update to the device their own certificate signed by a custom CA
certificate to manage client authentication.
Configures the Gen-2 Elliptic Curve Private Key. based on RFC 5915.
The Max value length is 8192 characters.
Sets the phone adapter system to enable the "CPE WAN Management Protocol" (TR-
069). Default setting is Yes.
Configures the TR-069 firewall rules , Value port range is 1-65535
Specifies URL of TR-069 Auto Configuration Servers (e.g.,
http://acs.mycompany.com), or IP address.
Default setting is: "https://acs.gdms.cloud"
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Sends periodic inform packets to ACS. Default is Yes.
Sets frequency that the inform packets will be sent out to ACS.
Default is 86400 seconds.
Enters username for ACS to connect to the HT8xx.
Enters password for ACS to connect to the HT8xx.
Configures the TR-069 connection request port. The value range is 0 to
65535.Default is 7547
Configures the Cert File for the phone adapter to connect to the ACS via SSL.
Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
Default is No.
Choose between (Version 1, Version 2c, or Version 3).
Listening Port of SNMP daemon (Default 161).
IP address of trap destination. Up to 3 trap destinations are supported. Users should
enter the IP addresses separated with comma (,).
Port of Trap destination (Default 162)
Choose between (Version 1, Version 2c, or Version 3).