Grandstream Networks HT812 Administration Manual page 19

3CX Auto Provision
Automatic Upgrade
Randomized Automatic Upgrade
Always Check for New Firmware at
Boot up
Check New Firmware only when F/W
pre/suffix changes
Always Skip the Firmware Check
Configuration File Types Allowed
Disable SIP NOTIFY Authentication
Authenticate Conf File
Validate Server Certificates
Trusted CA certificates A
Trusted CA certificates B
Load CA Certificates
Root CA Version
default value is "None".
Sends multicast "SUBSCRIBE" message for provisioning at booting stage, used for
PnP (Plug-and-Play) configuration. Default is Yes.
Specifies when the firmware upgrade process will be initiated; there are 4 options:
No: The HT8xx will only do an upgrade once at boot up.
Check every X minutes: User needs to specify a period in minutes.
Check every day: User needs to specify the start hour and the end hour of the day
(0-23).
Check every week: User needs to specify "Day of the week (0-6)". (Day of week is
starting from Sunday).
Default is No.
Randomized Automatic Upgrade within the range of hours of the day or postpone
the upgrade every X minute(s) by random 1 to X minute(s).
Configures the HT8xx to always search for the new firmware at boot up. During the
boot stage, the HT8xx will contact the firmware upgrade server to search for a new
firmware, when available it will start the upgrade process, otherwise it will boot
normally.
Configure the HT8xx to search for the new firmware when the firmware prefix /
suffix changes.
When this option is selected, the HT8xx will check for updates only when the
pre/suffix has been changed.
Configures the HT8xxto skip the firmware check, when this option is selected the
HT8xx will always skip searching for a new firmware.
Allows users to configure provision configuration file type in xml file only or all file
types.
Disables the SIP NOTIFY Authentication on the phone adapter. If set to "Yes", the
phone adapter will not challenge NOTIFY with 401.
The default setting is "No"
Authenticates configuration before being accepted. This protects the configuration
from unauthorized modifications. Default is No.
This feature allows users to validate server certificates with our trusted list of TLS
connections. The device needs to reboot after changing the setting.
Default is enabled.
Uses the certificate for Authentication if "Check Domain Certificates" is set to "Yes"
under "Account"–> "SIP Settings".
Uses the certificate for Authentication if "Check Domain Certificates" is set to "Yes"
under "Account"–> "SIP Settings".
This feature allows user to specify which certificate to trust when performing server
authentication.
Build-in trusted : (Default) Build-in trusted certificates
Custom trusted certificate: Uploaded Certificates
All trusted Certificates: Both built-in and uploaded Certificates
Configures the Root CA version. can be set to either Current root or new root.
Default Value is New Root.