Grandstream Networks HT812 Administration Manual page 30
Hide thumbs
Also See for HT812:
- Administration manual (67 pages) ,
- User manual (39 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
ID for
Incoming
INVITE
Authentic
Challenges the incoming INVITE for authentication with SIP 401 Unauthorized message.
ate
Incoming
Default is No.
INVITE
Authentic
Configures whether to validate the domain certificate when download the firmware/config file. If it is set to
ate
Server
"Yes", the phone will download the firmware/config file only from the legitimate server. The default setting is
"No".
Certificat
e Domain
Authentic
Configures whether to validate the server certificate when download the firmware/config file. If it is set to "Yes",
ate server
certificat
the phone will download the firmware/config file only from the legitimate server. The default setting is "No".
e chain
Allow
Incoming
Checks SIP address of the Request URI in the incoming SIP message; if it doesn't match the SIP server address
SIP
of the account, the call will be rejected.
Message
s from
Default is No.
SIP Proxy
Only
Use
Determines if the "Privacy header" will be presented in the SIP INVITE message and if it includes the caller info
Privacy
in this header. If set to Default, it will add Privacy header unless special feature is Telkom SA or CBCOM. Default
Header
is Default.
Use P-
Specifies if the P-Preferred-Identity Header will be presented in the SIP INVITE message. If set to "default", the
Preferred
P-Preferred-Identity Header will be omitted in SIP INVITE message when Telkom SA or CBCOM is active. If set
-Identity
to "Yes", the P-Preferred- Identity Header will always be presented. If set to "No", it will be omitted. Default
Header
setting is: Default.
Use P-
Access-
With this feature enabled, device will populate the WAN access node with IEE-802.11a, IEE-802.11b in P-
Network-
Access-Network-Info SIP header.
Info
Header
Use P-
Emergenc
This feature support of IEEE-48-addr and IEEE-EUI-64 in SIP header for emergency calls.
y-Info
Header
Use P-
When this feature is set to Yes, device will send P-Asserted-Identity Header on the SIP Invite.
Asserted-
Identity
Default setting is No.
Header
SIP
REGISTE
Specifies which address (LAN or WAN address) the device will detect to use it in SIP Register Contact Header.
R Contact
Default is LAN Address.
Header
Uses
Caller ID
Selects the Caller ID display order which need to be respected by the ATA.
Fetch
The available options are:
Advertisement
Table of Contents
