Grandstream Networks HT812 Administration Manual page 25

Upload Firmware
Upload Configuration
Export Backup Configuration
Restore From Backup Configuration
E911/HELD Protocol:
Enable E911
HELD Protocol
HELD Synchronization Interval
Location Server
Location Server Username
Location Server Password
Secondary Location Server
Secondary Location Server
Username
Secondary Location Server Password
HELD Location Types
HELD NAI
HELD Identity 1-10
HELD Identity 1-10 Value
E911 Emergency Numbers
Geolocation-Routing Header
Priority Header
Press Upload from local directory button to load the firmware file to the device from
your computer. The firmware filename should be "ht80xfw.bin" (ht802fw.bin for
HT802 for instance), "ht81xfw.bin" for HT812/HT814 or "ht818fw.bin" for HT818.
Press Upload from local directory button to load configuration file to the device from
your computer. The configuration file should be an XML file (for instance:
"config.xml"). Note: The field
is not mandatory in the document but if available only device with specified MAC
address will accept the configuration file.
Press Download button to export device backup configuration to computer.
The output is "cfg<mac>_enc.xml" (where <mac> is the MAC address of the device).
The file is encrypted and can be used on same device only.
Press Upload button to restore device configuration from previously exported
backup configuration.
Enable Enhanced 911 call. Default is disabled
Configure HELD transfer protocol. HTTP or HTTPS
The valid synchronization interval is between 30 to 1440 minutes. The
synchronization is off when the interval is 0.
Configure the primary Location Information Server (LIS) address
Configure the user name of the primary Location Information Server (LIS)
Configure the password of the primary Location Information Server (LIS)
Configure the seconary Location Information Server (LIS) address
Configure the user name of the secondary Location Information Server (LIS)
Configure the password of the secondary Location Information Server (LIS)
Configure "locationType" element in the location request. "geodetic", "civic" and
"location URI"
Configure "locationType" element in the location request. "geodetic", "civic" and
"location URI"
HELD Identity
HELD Identity value
A user can configure multiple emergency numbers separated with the delimiter
symbol ";".
If "Yes", E.911 INVITE message includes the "Geolocation-Routing" header with the
value "Yes"
If "Yes", E.911 INVITE message includes the "Priority" header with the value