76
Chapter 2 Using configuration commands
Example
ii> webproxy
webproxy start transparent on
webserver command
The
webserver [start
Table 32
Table 32 webserver command options
Option
start
port
stop
Example
ii> webserver
webserver is running on port 80
winsockserver command
The
parameter specifies the IPX frame type. If no frame type is specified,
is used for Ethernet interfaces or
II
Multiple frame types can run on a single physical interface.
winsockserver <interface> [802.3 | 802.2 | snap | tokenring | tokenringsnap]
302005-F
command starts or stops the Web server service.
webserver
port
<portnumber>
stop]
describes the
webserver
Definition
Starts the Web server.
Specifies the port for the Web server.
(default: 80)
portnumber
the server.
Stops the Web server.
command allows IPX clients to use the unit. The optional
winsockserver
command options.
- The actual port number on which you want to start
for token ring interfaces.
tokenring
Ethernet