Chargend Command; Dhcpd Command - Nortel BayStack 100-S Reference

chargend command

The
chargend
executes a diagnostic facility that accepts TCP connections on port 19 and sends
data to the client at the maximum possible rate.
chargend start | stop
Example
ii> chargend start

dhcpd command

The
dhcpd
Configuration Protocol (DHCP) service.
dhcpd [start
scope <scope_name> <first_IP_addr> <last_IP_addr> <netmask> <router>
exclude <first_IP_addr> [<last_IP_addr>]
lease <lease_period (in seconds)>
dns <IP_addr_of_Domain_Name_Server>...
domain <domain_name>
relay <IP_addr_of_DHCP_server>
delete <scope_name>
wins <IP_addr_of_Windows_Internet_Name_Server>...
node <TCP/IP_NetBIOS_node_type_(B, P, M, or H)>
stop]
Reference for the BayStack Instant Internet Remote Access Commands Version 7.11
command starts or stops the chargen service. This command
command displays or configures the unit's Dynamic Host
Chapter 2 Using configuration commands 63