Using The Nortel Business Access Point 120; Twisted-Pair Cable Assignments - Nortel 120 Using Manual

120 References

Twisted-pair cable assignments

For 10/100BASE-TX connections, a twisted-pair cable must have two pairs
of wires. Each wire pair is identified by two different colors. For example,
one wire might be green and the other, green with white stripes. Also, an
RJ-45 connector must be attached to both ends of the cable.
Copyright © 2006, Nortel Networks
.
CAUTION
Each wire pair must be attached to the RJ-45 connectors in a
specific orientation.
CAUTION
DO NOT plug a phone jack connector into the RJ-45 port. Use
only twisted-pair cables with RJ-45 connectors that conform with
FCC standards.
BAP120

Using the Nortel Business Access Point 120

NN47921-301 01.01 Standard
1.0 August 2006
Nortel Networks Confidential