System Identification; Tcp And Ip Settings - Nortel 120 Using Manual

48 System configuration management
Menu
Menu
Security
Status
AP Status
Station Station
Event Logs
System identification
The system name for the access point can be left at its default setting.
However, modifying this parameter can help you to more easily distinguish
different devices in your network.
System identification
System Name——An alias for the access point, enabling the device to
be uniquely identified on the network. (Default: Business Access Point
BAP120; Range: 1-32 characters).

TCP and IP settings

Configuring the access point with an IP address is required to manage
the access point.
Copyright © 2006, Nortel Networks
.
Description
Enables each VAP interface,
sets the SSID, and configures
wireless security (802.1X)
Displays information about
the access point and wireless
clients
Displays configuration settings
for the basic system and the
wireless interface
Shows the wireless clients
currently associated with the
access point
Shows log messages stored in
memory
Note: You can use the Web browser interface to access IP addressing
only if the access point already has an IP address that is reachable
through your network.
Using the Nortel Business Access Point 120
NN47921-301 01.01 Standard
1.0 August 2006
BAP120
Page
See "Security" (page 91).
See "Status information" (page
106).
See "Access Point Status"
(page 106).
See "Station Status" (page
107).
See "Event Logs" (page
Nortel Networks Confidential
108).