Filter Control - Nortel 120 Using Manual

Filter control

The access point can employ network traffic frame filtering to control
access to network resources and increase security. You can prevent
communications between wireless clients and prevent access point
management from wireless clients. Also, you can block specific Ethernet
traffic from being forwarded by the access point.
Filter control
Inter Client STAs Communication Filter—Sets the global mode for
wireless-to-wireless communications between clients associated to Virtual
AP (VAP) interfaces on the access point. (Default: Disable)
•
•
•
AP Management Filter—Controls management access to the access point
from wireless clients. Management interfaces include the Web or SNMP.
(Default: Disabled)
•
•
Copyright © 2006, Nortel Networks
.
Disabled: All clients can communicate with each other through the
access point.
Prevent Intra VAP client communication: When enabled, clients
associated with a specific VAP interface cannot establish wireless
communications with each other. Clients can communicate with clients
associated to other VAP interfaces.
Prevent Inter and Intra VAP client communication: When enabled, clients
cannot establish wireless communications with any other client, either
those associated to the same VAP interface or any other VAP interface.
Disabled: Allows management access from wireless clients.
Enabled: Blocks management access from wireless clients.
Using the Nortel Business Access Point 120
NN47921-301 01.01 Standard
1.0 August 2006
BAP120
WebUI navigation 55
Nortel Networks Confidential