Printing Only With White Ink (Wmt Mode) - Roland VS-540 Manual

3-1 Print Job Setting

Printing Only with White Ink (WMT Mode)

This section describes how to perform printing only with the white ink when the printer is in WMT mode (8
colors of CMYKLcLmWMT). To use the white ink in printing, you need to use the printing data where the use
of the white ink is designated. If the printing data have the portion designating the use of other colors, with
the setting described in this section, you can print with the white ink only the area of the image which has
been designated to print with the white ink.
 P. 12, "2-3 Creating Printing Data"
Procedure

Make sure that you have finished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").


30
Chapter 3 Printing
Double-click .
Queue A Properties" window appears.
Click .
For [Media Type], select "xxx[MT]: Clear
PET Film" or "xxx[MT]: PET Clear Film,
Adhesive" (or xxx: Clear PET Film," "xxx:
PET Clear Film, Adhesive).
* "xxx" indicates "ESP-CL" and others.
For [Print Quality], select [High Quality].
When "xxx: Clear PET Film" or "xxx: PET Clear Film,
Adhesive" is selected for [Media Type], [Print Quality]
need not be selected (because the option is only
[High Quality]).
For [Mode], select [White (v)].