Shutting Down The Projector - BenQ MX854UST User Manual

Shutting down the projector

1. Press
you.
If you don't respond in a few seconds, the message will disappear.
2. Press
flashes orange, the projection lamp shuts down, and the fans will continue to run for
approximately 90 seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during the cooling
process. To shorten the cooling time, you can also activate the Q uick Cooling function. See
"Q uick Cooling" on page 57
3. O nce the cooling process finishes, a "
O ff Ring Tone
indicator light
stop. D isconnect the power cord from the
power outlet.
• To turn off the power ring tone, see
Power on/off ring tone" on page 45
• If the projector is not properly shut down, to protect
the lamp, when you attempt to re-start the
projector, the fans will run for a few minutes to cool down. Press
again to start the projector after the fans stop and the POW ER indicator light turns orange.
• Lamp life results will vary depending on environmental conditions and usage.
O peration
POW ER O FF
or
POW ER O FF
or
for details.
" will be heard. The
is a steady orange and fans
and a confirmation message will appear prompting
a second time. The
Power
POW ER
"Turning off the
for details.
POW ER indicator light
POW ER or ON
47