BenQ MX854UST User Manual page 55

FU N CT IO N
Picture Mode
Reference
Mode
Brightness
Contrast
Color
T int
Sharpness
Brilliant Color
Color
Temperature
Color
Temperature
Fine Tuning
3D Color
Management
Reset picture
settings
O peration
DESCRIPT IO N
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type.
See "Selecting a picture mode" on page 37
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections listed
on the same page below.
See "Setting the User 1/User 2 mode" on page 38
Adjusts the brightness of the image.
See "Adjusting Brightness" on page 38
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 38
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 38
T he function is only available when Component, Video or S-
Video with N T SC system is selected.
Adjusts the red and green color tones of the image.
See "Adjusting Tint" on page 38
T he function is only available when Video or S-Video with N T SC
system is selected.
Adjusts the image to make it look sharper or softer.
See "Adjusting Sharpness" on page 38
T he function is only available when Component, Video or S-
Video with N T SC system is selected.
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 38
See "Selecting a Color Temperature" on page 39
See "Setting a preferred color temperature" on page 39
See "3D Color Management" on page 40
See "Resetting current or all picture modes" on page 41
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
55