Introduction; Projector Features - BenQ MX854UST User Manual

Introduction

Projector features

The projector offers the following features
SmartEco™ starts your dynamic power saving
•
The SmartEco™ technology offers a new way of operating the projector lamp system
and saves lamp power up to 30% depending on the content brightness level.
Interactive capability
•
Extend the interactive function with optional PointW rite module.
Vertical 8% lens shift (N o available in MH 856U ST )
•
O ptimize the installation flexibility.
Corner fit
•
Correct each distorted corner to get a perfect rectangular image.
Filter Free
•
Filter free design to lower maintenance and operating costs.
N etwork Control
•
Integrated RJ 45 connector for wired network control allowing management of
projector status from a computer using a web browser.
Enable N etwork Standby mode <6W.
Crestron RoomView
•
The projector supports Crestron eControl and RoomView and AMX allowing you to
control and manage equipment from a remote computer via LAN connection.
O ne-key auto-adjustment
•
Pressing
immediately.
Built-in 10W x 2 speaker(s)
•
Built-in 10W x 2 speaker(s) providing stereo audio when an audio input is connected.
Q uick Cooling, Auto Power O ff, Signal Power O n, Direct Power O n
•
Q uick Cooling
projector.
no input signal is detected after a set period of time.
on your projector automatically once detecting the signal input and
boots up the projector automatically when the power is connected.
• T he apparent brightness of the projected image will vary depending on the ambient lighting
conditions, selected input signal contrast/brightness settings, and is directly proportional to
projection distance.
• T he lamp brightness will decline over time and may vary within the lamp manufacturers
specifications. T his is normal and expected behavior.
Introduction
®
, and AMX supported
AU TO
on the keypad or remote control to show the best picture quality
function speeds up the cooling process when turning off the
Auto Power O ff
function allows the projector to turn off automatically if
Signal Power O n
function turns
Direct Power On
7