BenQ MX854UST User Manual page 38

Setting the U ser 1/U ser 2 mode
There are two user-definable modes if the current available picture modes are not suitable
for your need. You can use one of the picture modes (except the
starting point and customize the settings.
1. Press
2. Go to the
3. Press
4. Press
T his function is only available when U ser 1 or U ser 2 mode is selected up in the Picture Mode
sub-menu item.
5. Press
6. Press
See "Fine-tuning the image quality in user modes"
Fine-tuning the image quality in user modes
According to the detected signal type, and selected picture mode, some of the functions
listed below may not be available. Base on your need, you can make adjustments to these
functions by highlighting them and press
Adjusting Brightness
The higher the value, the brighter the image. And
lower the setting, darker the image. Adjust this control
so the black areas of the image appear just as black and
that detail in the dark areas is visible.
Adjusting Contrast
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the
input and viewing environment.
Adjusting Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting T int
The higher the value, the more reddish the picture becomes. The lower the value, the
more greenish the picture becomes.
Adjusting Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to
enable higher brightness while providing truer, more vibrant colors in picture. It enables a
greater than 50% brightness increase in mid-tone images, which are common in video and
natural scenes, so the projector reproduces images in realistic and true colors. If you
prefer images with that quality, select
O ff
W hen is selected, the
38 O peration
MEN U /EX IT
to open the O n-Screen D isplay (O SD ) menu.
Picture Picture Mode
>
◄ ►
U ser 1
/ to select
▼
Reference Mode
to highlight
◄ ►
/ to select a picture mode that is closest to your need.
▼
to select a sub-menu item to be changed and adjust the value with
Brightness
setting to suit your selected
Color T emperature
menu.
U ser 2
to .
.
below for details.
◄ ►
/ on the projector or remote control.
O n
. If you don't need it, select
function is not available.
U ser 1 U ser 2
/ ) as a
◄ ►
/
O ff
.
.