BenQ MX854UST User Manual page 32

If you forget the password
If the password function is activated, you will be asked
to enter the five-digit password every time you turn on
the projector. If you enter the wrong password, the
password error message as pictured to the right
displays lasting for three seconds, and the message
'IN PU T PASSW O RD'
entering another five-digit password, or if you did not
record the password in this manual, and you absolutely do not remember it, you can use
the password recall procedure. See
for details.
If you enter an incorrect password 5 times in succession, the projector will automatically
shut down in a short time.
Entering the password recall procedure
1. Press and hold
remote control for 3 seconds. The
projector will display a coded number on
the screen.
2. W rite down the number and turn off your
projector.
3. Seek help from the local BenQ service
center to decode the number. You may be
required to provide proof of purchase
documentation to verify that you are an
authorized user of the projector.
Changing the password
1. O pen the O SD menu and go to the
Settings
2. Press
3. Enter the old password.
• If the password is correct, another message
displays.
• If the password is incorrect, the password error message displays lasting for three
seconds, and the message
your retry. You can press
password.
4. Enter a new password.
T he digits being input will display as asterisks on-screen. W rite your selected password down
here in this manual in advance or right after the password is entered so that it is available to you
should you ever forget it.
Password: __ __ __ __ __
Keep this manual in a safe place.
5. Confirm the new password by re-entering the new password.
32 O peration
follows. You can retr y by
AU T O
on the projector or
Change password
>
MO DE/EN T ER
. The message
"Entering the password recall procedure" on page 32
RECALL PASSW ORD
System Setup: Advanced
menu.
'IN PU T CU RREN T PASSW O RD'
'IN PU T N EW PASSW O RD'
'IN PU T CU RREN T PASSW O RD'
MEN U /EX IT
to cancel the change or try another
Password Error
Please Try again.
Please write down the recall code,
and contact BenQ
Customer Center.
Recall code:
12345678
MEN U
Security
>
displays.
displays for
Back