BenQ MX854UST User Manual page 40

3D Color Management
In most installation situations, color management will not be necessary, such as in
classroom, meeting room, or lounge room situations where lights remain on, or where
building external windows allow daylight into the room.
O nly in permanent installations with controlled lighting levels such as boardrooms, lecture
theaters, or home theaters, should color management be considered. Color management
provides fine color control adjustment to allow for more accurate color reproduction,
should you require it.
Proper color management can only be achieved under controlled and reproducible viewing
conditions. You will need to use a colorimeter (color light meter), and provide a set of
suitable source images to measure color reproduction. These tools are not provided with
the projector, however, your projector supplier should be able to provide you with suitable
guidance, or even an experienced professional installer.
The Color Management provides six sets (RGBCMY) of colors to be adjusted. W hen you
select each color, you can independently adjust its range and saturation according to your
preference.
If you have purchased a test disc which contains various color test patterns and can be
used to test the color presentation on monitors, TVs, projectors, etc. You can project any
image from the disc on the screen and enter the
adjustments.
To adjust the settings:
1. Go to the
2. Press
3. H ighlight
Blue, Cyan, Magenta and Yellow.
4. Press
will include colors consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right for
how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its range
will include red close to yellow and red close
to magenta.
5. Press
its values to your preference by pressing
◄ ►
/
the image immediately.
For example, if you select Red and set its
value at 0, only the saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of "0" removes that color from the image entirely. If the saturation is too high,
that color will be overpowering and unrealistic.
6. Press
The contrast level of the primary color you select will be affected. Ever y adjustment
made will reflect to the image immediately.
7. Repeat steps 3 to 6 for other color adjustments.
40 O peration
Picture
menu and highlight
MO DE/EN T ER
and the
Primary color
▼
H ue
to highlight
▼
Saturation
to highlight
. Every adjustment made will reflect to
▼
Gain
to highlight
3D Color Management
3D Color Management
3D Color Management
◄ ►
and press / to select a color from among Red, Green,
◄ ►
and press / to select its range. Increase in the range
and adjust
and adjust its values to your preference by pressing
menu to make
.
page displays.
Yellow
RED
Cyan
Magenta
BLU E
GREEN
◄ ►
/ .