BenQ MX854UST User Manual page 27

Auto-adjusting the image
In some cases, you may need to optimize the picture quality. To do this, press
the projector or remote control. W ithin 3 seconds, the built-in Intelligent Auto
Adjustment function will re-adjust the values of Frequency and Clock to provide the best
picture quality.
The current source information will be displayed in the upper left corner of the screen for
3 seconds.
• T he screen will be blank while AU T O is functioning.
• T his function is only available when PC signal (analog RGB) is selected.
Fine-tuning the image size and clarity
Sharpen the image by rotating the FO CUS ring.
Correcting 2D Keystone
2D Keystone function enables a wider projector installation area compared to
conventional projectors with limited positioning in front of the screen.
To correct this, you will need to manually correct it following one of these steps.
• Using the projector or remote control
Press /
control to display the 2D Keystone page. Press
vertical values from -30 to 30. Press
values from -30 to 30.
O peration
on the projector or remote
▲ ▼
/ to adjust
◄ ►
/ to adjust horizontal
AU T O
on
27