Table of Contents
Advertisement
68
Occupant safety
Attach the ISOFIX or i‑Size child restraint sys-
#
tem to both mounting brackets in the vehicle.
After removing the child seat, reattach covers
#
1
or 2.
Fastening a Top Tether
& WARNING Risk of injury or death if the
rear seat backrests are not locked after
Top Tether belts are fitted
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
Always lock rear seat backrests after fit-
#
ting Top Tether belts.
Observe the lock verification indicator.
#
If the left and right seat backrests are not
engaged and locked in place, this will be shown
on the instrument display.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury may be reduced by Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with ISOFIX or
i‑Size and the vehicle.
Place the ISOFIX or i‑Size child restraint sys-
#
tem with Top Tether on the rear seat. It is
essential to comply with the child restraint
system manufacturer's installation instruc-
tions.
Fold the rear seat backrest forward
#
(
page 121).
/
Attach Top Tether hook
2
to Top Tether
#
anchorage 1.
Fold the rear seat backrest back
#
(
page 121).
/
Advertisement
Table of Contents
