Table of Contents
Advertisement
* NOTE Deployment of components of the
restraint system when the front passenger
seat is unoccupied and a seat belt is
buckled
When the front passenger seat is unoccupied
and the seat belt tongue of the seat belt is
engaged in the seat belt buckle, components
of the restraint system may deploy unnecessa-
rily on the front passenger side, e.g. the seat
belt tensioner.
Only buckle the seat belts as intended.
#
%
Observe the notes on stowage areas
(
page 118).
/
Information on fitting a child restraint system
and on children travelling in the vehicle can
be found in the "Children in the vehicle" sec-
tion (
page 62).
/
Seat belt adjustment function
®
Vehicles with PRE-SAFE
: after a front seat belt
has been fastened, the automatic seat belt adjust-
ment may apply a certain tightening force. Do not
hold the seat belt tightly while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia system
(
page 47).
/
Activating/deactivating seat belt adjustment via
the multimedia system
Multimedia system:
©
Settings
Vehicle
4
5
5
Activate or deactivate
Belt
adjustment.
#
Releasing seat belts
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Seat belt warning function for the driver and front
passenger
The ü seat belt warning lamp in the Instru-
ment Display is a reminder that all vehicle occu-
pants must wear their seat belts correctly.
Occupant safety
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.
When the vehicle is switched on, the rear seat
belt status display informs you for a certain
amount of time which rear seat belt is not fas-
tened.
47
Advertisement
Table of Contents
