Table of Contents
Advertisement
Folding the ball neck out
Secure the vehicle against rolling away.
#
Keep the swivel range clear.
#
Remove the trailer cable or adapter plug.
#
Pull switch
2
until the ball neck unlocks.
#
The ball neck will fold out from under the rear
bumper.
1
Indicator lamp
will flash.
Pull the ball neck in the direction of the arrow
#
until it engages audibly in a vertical position.
1
Indicator lamp
on the ball neck release
switch will go out.
If the ball neck is not securely locked in place,
the
Trailer coupling Check
appear on the instrument display.
Remove the cover cap from the ball head and
#
store it in a safe place.
Make sure that the ball on the ball neck is clean.
Check that it is either greased or dry (grease-
free), depending on the instructions for the trailer.
Folding the ball neck in
Pull switch
#
The ball neck will fold up under the rear
bumper.
Indicator lamp
Push the ball neck in the direction of the
#
arrow until it engages audibly behind the
bumper.
Indicator lamp
on the instrument display will disappear.
Observe the information about displays on the
instrument display:
Indicator and warning lamps (
R
Display messages (
R
lockmessage will
Driving and parking 245
2
until the ball neck unlocks.
1
will flash.
1
will go out and the message
page 434)
/
page 375)
/
Advertisement
Table of Contents
