Table of Contents
Advertisement
Mounting dimensions
1
Fastening points
2
Overhang dimension
3
Rear axle centre line
The overhang dimension and fastening points are
valid for a trailer hitch installed at the factory.
Overhang dimension length
Model
2
Overhang dimen-
All models
Towing capacity
The tongue weight is not included in the towing
capacity.
Towing capacity, braked (at a minimum start-off
gradeability of 12%)
Model
Towing capacity,
All models
Towing capacity, unbraked
Model
Towing capacity,
All models
Maximum tongue weight
* NOTE Damage caused by the trailer com-
ing loose
If the tongue weight used is too low, the trailer
sion
may come loose.
1203 mm
The tongue weight must not be below
#
50 kg.
Use a tongue weight that is as close as
#
possible to the maximum permissible
tongue weight.
* NOTE Damage caused by the bicycle rack
coming loose
When using a bicycle rack, both the maximal
tongue weight and the maximal load capacity
braked
should be observed.
1800 kg
Do not exceed the permissible load
#
capacity.
Observe the additional notes on load capacity
unbraked
(
page 248).
/
750 kg
Technical data 373
Advertisement
Table of Contents
