Table of Contents
Advertisement
110 Seats and stowing
instrument cluster. A warning tone will also
sound.
The seat will automatically move to the stored
position.
Folding the front seat backrest forwards/back-
wards (vehicles without memory function)
Folding forwards
If necessary, release the head restraint and
#
push it down.
Pull seat release handle
1
#
backrest forwards until the seat backrest
engages.
Push the seat as far forwards as it will go.
#
Folding back
Push the seat back horizontally by the seat
#
backrest until it reaches the seat position that
was previously set.
Fold the seat backrest back until it engages.
#
Do so as smoothly as possible.
If the seat backrest is not engaged, this will be
shown on the multifunction display on the
instrument cluster. A warning tone will also
sound.
After the seat backrest has been folded back,
#
check the position of the head restraint and
set it to the correct position.
If the set seat position can no longer be reached,
e.g. because of luggage in the rear footwell or
because occupants have entered the rear of the
vehicle:
Pull seat release handle
#
the seat backrest to an upright position.
The seat will lock in the new fore-and-aft posi-
and fold the seat
tion.
Switching the seat heating on/off
& WARNING Risk of burns due to repeatedly
switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest pad-
ding to become very hot.
In particular, the health of persons with limited
temperature sensitivity or a limited ability to
react to high temperatures may be affected or
they may even suffer burn-like injuries.
Do not repeatedly switch on the seat
#
heating.
To protect against overheating, the seat heating
may be temporarily deactivated after it has been
switched on repeatedly.
1
again and return
Advertisement
Table of Contents
