Table of Contents
Advertisement
Always secure the vehicle against rolling
#
away before you leave it.
Requirements:
The vehicle is stationary.
R
The driver's door is closed or the seat belt on
R
the driver's side is fastened.
The vehicle has been started or has been
R
automatically switched off by the ECO start/
stop function.
The electric parking brake is released.
R
Active Distance Assist DISTRONIC is deactiva-
R
ted.
The transmission is in position h, k or i.
R
Activating the HOLD function
Depress the brake pedal, and after a short
#
time quickly depress further until the ë
display appears in the Instrument Display.
Release the brake pedal.
#
Deactivating the HOLD function
Depress the accelerator pedal to pull away.
#
or
Depress the brake pedal until the ë display
#
disappears from the Instrument Display.
The HOLD function is deactivated in the following
situations:
Active Distance Assist DISTRONIC is activa-
R
ted.
The transmission is shifted to position j.
R
The vehicle is secured with the electric park-
R
ing brake.
In the following situations, the vehicle is held by
transmission position j and/or by the electric
parking brake:
The seat belt is unfastened and the driver's
R
door is opened.
The vehicle is switched off.
R
There is a system malfunction.
R
The power supply is insufficient.
R
Driving and parking 193
Function of Hill Start Assist
Hill Start Assist holds the vehicle for a short time
when pulling away on a hill under the following
conditions:
The transmission is in position h or k.
R
The electric parking brake is released.
R
This gives you enough time to move your foot
from the brake pedal to the accelerator pedal and
depress it before the vehicle begins to roll away.
& WARNING Risk of accident and injury due
to the vehicle rolling away
After a short time, Hill Start Assist no longer
holds the vehicle.
Swiftly move your foot from the brake
#
pedal to the accelerator pedal. Do not
leave the vehicle when it is being held by
Hill Start Assist.
Advertisement
Table of Contents
