Table of Contents
Advertisement
108 Seats and stowing
Setting the seat heating balance
Select
Seat heating
balance.
#
Adjust the heat distribution for the desired
#
seat.
Setting automatic seat adjustment
& WARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat after
calling up a driver profile
Selecting a user profile may trigger an adjust-
ment of the driver's seat to the position saved
under the user profile. You or other vehicle
occupants could be injured in the process.
Make sure that when the position of driv-
#
er's seat is being adjusted using the mul-
timedia system, no people or body parts
are in the seat's range of movement.
If a person is in danger of becoming trapped,
immediately stop the adjustment process by:
a) Tapping the warning message on the
#
media display.
or
b) Pressing a position button of the
#
memory function or a seat adjustment
switch in the driver's door.
The adjustment process is stopped.
Requirements:
Adapting the driver's seat position to body
R
size: automatic seat adjustment has been
switched on.
Multimedia system:
©
Settings
Vehicle
4
5
5
Automatic seat adjustment
5
Switching automatic seat adjustment on/off
When the active user profile is changed while the
vehicle is stationary, the driver's seat, outside mir-
rors and seat contour will automatically be adap-
ted to the driver.
Select
On
or Off.
#
%
This setting is available only for individual user
profiles. For the guest profile, automatic seat
adjustment cannot be switched on or off.
Adjusting the driver's seat position to body size
The vehicle will calculate a suitable driver's seat
position on the basis of the driver's body size and
set this directly.
To set the unit of measurement: select
#
ft/in.
Set the size using the scale.
#
Select
Start
positioning.
#
The driver's seat position will be adjusted to
the body size that has been set.
%
If the driver's seat position calculated by the
vehicle is not practical or comfortable, it can
be changed manually at any time via the but-
tons.
The exterior mirrors are not set via this func-
tion. Instead, they have to be set manually via
the switches.
%
You can also configure these settings via the
Mercedes me portal for your user profile. By
synchronising the profiles in the vehicle and
the Mercedes me connect profiles, you can
carry over these settings for your vehicle. Fur-
ther information about synchronising user
profiles .
cm
or
Advertisement
Table of Contents
