Table of Contents
Advertisement
Comply with the manufacturer's safety notes on
the sticker on the tyre inflation compressor.
Have the tyre sealant bottle replaced in a qualified
specialist workshop every five years.
Do not remove any foreign objects which have
#
entered the tyre.
Affix part
1
of the TIREFIT sticker to the
#
instrument cluster within the driver's field of
vision.
Affix part
2
of the TIREFIT sticker near the
#
valve on the wheel with the defective tyre.
Pull plug
4
with the cable and hose
#
of the tyre inflation compressor housing.
Push the plug of hose
5
into flange
#
1
tyre sealant bottle
until the plug engages.
Place tyre sealant bottle
1
#
into recess
2
of the tyre inflation compres-
sor.
Remove the valve cap from valve
#
faulty tyre.
Screw filling hose
#
Insert plug
#
cle.
5
out
Switch on the vehicle.
#
Switch on the tyre inflation compressor using
#
6
of
On/Off switch 3.
The tyre is inflated. First, tyre sealant is pum-
ped into the tyre. The pressure may briefly rise
head downwards
to approximately 500 kPa (5.0 bar/73 psi).
Do not switch off the tyre inflation compressor
during this phase!
Breakdown assistance 325
7
on the
8
onto valve 7.
4
into a 12‑V‑socket in your vehi-
Advertisement
Table of Contents
