Basic Network Settings; Figure 14: Network Settings Configuration - Grandstream Networks DP750 User Manual

2. Use arrow keys to reach Settings
3. Browse sub-menus until reaching Status sub-menu and press Select.

Basic Network Settings

Once connected to the network the base station attempts to contact a DHCP server to obtain valid network
settings (e.g., IP address, subnet mask, gateway address and DNS address) by default.
The users could also configure basic network settings manually. In order to configure the network settings
manually, please follow the steps bellow:
1. Press Menu (left softkey
2. Use arrow keys to reach Settings
3. Navigate to select Network Settings.
4. Enter the system PIN code (default: 0000) and press the soft key "Save" (left softkey
5. To change to static IP, press
6. Enter valid values in the IP Address, Subnet Mask, Gateway, DNS Server fields.
7. Press softkey "Save" (
A message prompt message will be displayed to confirm that the new settings are saved successfully.
.
or the selection key
.
or to select Static from the IP Settings field.
) to save and apply the new changes.

Figure 14: Network Settings configuration

DP750/DP720 User Guide
) to bring up operation menu.
).
P a g e | 34