Locate Via Dp750 Base Station; Checking System Status; Basic Network Settings; Table 9: Dp720 Info Description - Grandstream Networks DP750 User Manual

Locate via DP750 Base station

1. On DP750 Base station back side, press Radio/Page button
2. All registered handsets will receive Paging call.
3. Once located, you can end the paging calling by pressing any key on the handsets or by pressing
again Radio/Page button.

Checking System Status

You can view the system status on your handset including the following information of the system:
Item
Model (RF)
Firmware
IP Address
Subnet Mask
Gateway
MAC address
IPEI
•
To check the handset status
1. Press Menu (left softkey
2. Use arrow keys to reach Status menu

Basic Network Settings

Once connected to the network, DP750 base station will attempt to contact a DHCP server to obtain valid
network settings (e.g., IP address, subnet mask, gateway address and DNS address) by default.
The users could also configure basic network settings manually from a registered DP720 Handset. In order
to configure the network settings manually, please follow the steps below:

Table 9: DP720 Info description

Description
Displays the product model, hardware version and DECT region of DP720.
i.e.: DP720 1.4A (EU)
Current firmware version installed on DP720. i.e.: 1.0.3.17
IP address of the base station DP750 if registered.
Subnet Mask of the base station DP750 if registered.
Gateway IP of the base station DP750 if registered.
MAC address of the base station DP750 if registered.
International Portable Equipment Identifier.
Unique "serial number" for DECT handsets.
or the selection key
DP750/DP720 User Guide
.
) to bring up operation menu.
.
P a g e | 34