Status/System Info - Grandstream Networks WP810 Series Administration Manual

MAC Shows Device ID in hexadecimal format. This is needed by network administrators for troubleshooting. The MAC
Addres address will be used for provisioning and can be found on the label on original box and on the label located on
s the bottom panel of the device.
IPv4
Addres Indicates the configured address mode: DHCP or Static IP
s Mode
IPv4
Addres Displays assigned IP address. Example: 192.168.5.110
s
Subnet
Displays assigned subnet mask. Example: 255.255.255.0
Mask
Gatew
Displays assigned default gateway. Example: 192.168.5.1
ay
IPv6
Addres Indicates the configured address mode: DHCP or Static IP
s Mode
IPv6
Addres Displays assigned IP address.
s
DNS Shows assigned DNS server address.
NAT
Indicates type of NAT for each Profile. (Based on STUN protocol.)
Type
NAT
Travers
al
Accoun
Indicates type of NAT for Account 1.
t 1
Accoun
Indicates type of NAT for Account 2.
t 2

Status/System Info

Product Model
Part Number
Software Version
Boot
Manifest
Table 13: Status/Network Status
Product model of the phone.
Product part number.
Booting code version.
Specifies Manifest version.