Checking System Status; Basic Network Settings; Table 10: Dp720 Info Description - Grandstream Networks DP750 User Manual

Checking System Status

You can view the system status on your handset including the following information of the system:
Item
Model
Firmware
Hardware
IPEI
DECT Region
IP Address
Subnet Mask
Gateway
MAC address
To check the handset status:
1. Press Menu (left soft key
2. Use Navigation keys to reach
3. Browse sub-menus until reaching Info sub-menu and press Select.

Basic Network Settings

Once connected to the network the base station attempts to contact a DHCP server to obtain valid network
settings (e.g., IP address, subnet mask, gateway address and DNS address) by default.
The users could also configure basic network settings manually. In order to configure the network settings
manually, please follow the steps bellow:
1. Press Menu (left soft key
2. Use Navigation keys to reach
3. Navigate to select NetworkSettings.
4. Enter the system PIN (default: 0000) and press the soft key Save (Left arrow key),
5. To change to static IP, pressorto select Static from the IP Settings field.
6. Enter valid values in the IP Address, Subnet Mask, Gateway, DNS Server fields.

Table 10: DP720 Info description

Description
Displays the handset model. DP720
Displays the current firmware version installed on DP720. i.e.: 1.0.0.14
Displays the hardware version of DP720. i.e.: 1.4A
International Portable Equipment Identifier.
Unique "serial number" for DECT handsets.
Displays region of DECT. i.e. EU or US
Displays IP address of the base station DP750 if registered.
Displays Subnet Mask of the base station DP750 if registered.
Displays Gateway IP of the base station DP750 if registered.
Displays MAC address of the base station DP750 if registered.
or the selection key
Settings menu
or the selection key
Settings menu
DP750/DP720 User Guide
) to bring up operation menu.
) to bring up operation menu.
P a g e | 31