Configuration Via Web Browser; Accessing The Web Ui; Web Gui Languages - Grandstream Networks WP810 Series Administration Manual

3. Access Network Status menu to obtain the IP address of the WP810/WP822/WP825.
WEB GUI ACCESS CONFIGURATION
The WP810/WP822/WP825 can be configured using:
Web GUI embedded on the handset using PC's web browser.
LCD Configuration Menu using the WP810/WP822/WP825 keypad.
Note
From the Web GUI, you can configure all the functions supported by the WP810/WP822/WP825; while via keypad menu, you
can access limited configuration.

Configuration via Web Browser

The WP810/WP822/WP825 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages
allow a user to configure the handset through a Web browser such as Google Chrome, Mozilla Firefox.
Note
Please note that Microsoft's IE 9 and below are not supported, also the records from the web cannot be played with IE10, Edge
and Safari. We highly recommend using Google Chrome or Mozilla Firefox.

Accessing the Web UI

1. Connect the computer to the same network as WP810/WP822/WP825.
2. Make sure the handset is booted up and powered correctly.
3. You may check the IP address on the phone LCD menu Status �� Network Status. Please see
WP810/WP822/WP825 IP Address
4. Open Web browser on your computer and enter the WP810/WP822/WP825 IP address in the address bar of the browser.
5. Enter the administrator's username and password to access the Web Configuration Menu.
Note
The computer must be connected to the same sub-network as the phone. This can be easily done by connecting the
computer to the same hub or switch as the phone.
The default administrator username is "admin", and the random password can be found on the sticker at the back of the
unit. the default end-user username is "user" and the password is "123".
If 'Web Access' parameter is set to "Disabled" under Advanced settings
disabled.

Web GUI Languages

Figure 11: Obtaining IP Address
Obtain
�� System security; web UI access will be