Table of Contents
Advertisement
Optional Network Board Driver (1000BASE-T 2ch/1000BASE-T
4ch/1000BASE-T/10GbE)
If you want to use an optional Network Board (1000BASE-T 2ch/1000BASE-T 4ch), install the driver stored in
EXPRESSBUILDER DVD.
When using the 1000BASE-T 2ch, 1000BASE-T 4ch, or1000BASE-T:
"\001\win\winnt\w2k3amd\dl3\pro1000\winx64"
If the procedure of installation is not clear, refer to the installation procedure described in the section
"Installation of the Optional Network Board Driver".
When using the 10GbE:
Please refer to the installation manual provided with the board.
Installation of the Optional Network Board Driver
1.
Start Device Manager.
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE:
[(Intel (R) PRO/1000...)] is the name of On-Board adapter. All other names show
the Optional Network Board.
3.
Click the [Driver] tab and click [Update Driver...].
[Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location (Advanced)] radio button and click [Next].
5.
Select the [Search for the best driver in these locations] radio button and check off the [Search removable
media (floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and when using [1000BASE-T(2ch)/1000BASE-T
(4ch)/1000BASE-T)], specify
[\001\win\winnt\w2k3amd\dl3\pro1000\winx64].
Click [Next].
7.
Click [Finish].
D-13
Advertisement
Table of Contents
