Gps Settings; Menu Settings; Device Settings; You Can Set Up The Connection To The Gps Receiver - Nextar Q4-MD Software Manual

5.5.7 GPS settings

You can set up the connection to the GPS receiver. Tap the following buttons:
.
Button
GPS receiver ...
The first line of the screen informs you about the connection status of the
GPS receiver.
Connecting the GPS receiver is automatic in Nextar Navigation System,
so normally you will not need this screen of settings at all.
GPS Enabled
Turn the connection to the GPS receiver on or off. Turning off the GPS
receiver can be useful for indoors use or demonstration purposes.

5.5.8 Menu settings

You can modify the look and behavior of the Menu screens. Tap the following buttons:
,
Button
Animation You can activate and deactivate the Menu animations. When animation is
turned on, buttons on Menu and keyboard screens appear in an animated
way.
Background
You can choose the image to be used as the menu background image.
Skin
You can choose from a list of available skins to change the look of Nextar
Navigation System.

5.5.9 Device settings

You can change some device settings to control the screen backlight when Nextar Navigation
System is running. Tap the following buttons:
Button
Power
You can set how the backlight will behave when the screen has not been
Management
touched for a while. You have the following options:
.
•
Backlight Always On: The screen is continuously lit.
•
Smart: When running on battery, Smart Powersave will light up the
screen only when you tap the screen, or if there is something to
show you. After a few seconds the light level decreases, and after
another few seconds the backlight turns off. This helps achieve a
longer battery life.
Description
Description
, ,
Description
79
, ,
,
.