Navigating Through The Telnet Screens - Netopia 3341-ENT Firmware User Manual

Navigating through the Telnet Screens

Use your keyboard to navigate the Netopia Firmware Version 8.7's configuration screens, enter and edit
information, and make choices. The following table lists the keys to use to navigate through the Telnet screens.
Move through selectable items in a screen or pop-up menu
Set a change to a selected item or open a pop-up menu of
options for a selected item like entering an upgrade key
Change a toggle value (Yes/No, On/Off)
Restore an entry or toggle value to its previous value
Move one item up
Move one item down
Page up
Page down
Display a dump of the device event log
Display a dump of the WAN event log
Refresh the screen
To help you find your way to particular screens, some sections in this guide begin with a graphical path guide
similar to the following example:
This particular path guide shows how to get to the Network Protocols Setup screens. The path guide represents
these steps:
1. Beginning in the Main Menu, select System Configuration and press Return. The System Configuration
screen appears.
2. Select IP Setup and press Return. The IP Setup screen appears.
To go back in this sequence of screens, use the Escape key.
To...
Main
Menu
System
Configuration
Use These Keys...
Up, Down, Left, and Right Arrow
Return or Enter
Tab
Esc
Up arrow or Control + O
Down arrow or Control + K
Control + A
Control + Z
Control + E
Control + F
Control + L
IP Setup
Introduction 1-5