Ip Parameters (Wan Default Profile) - Netopia 3341-ENT Firmware User Manual

4-24 Firmware User Guide
IP Parameters (WAN Default Profile)
The Netopia Firmware Version 8.7 using RFC 1483 supports a WAN default profile that permits several
parameters to be configured without an explicitly configured Connection Profile.
The procedure is similar to the procedure to bind map lists and server lists to a Connection Profile.
From the Main Menu go to the WAN Configuration screen, then the Default Profile screen. Select IP Parameters
and press Return.
Main
Menu
The IP Parameters (Default Profile) screen appears.
Address Translation Enabled:
NAT Map List...
NAT Server List...
Filter Set (Firewall)...
Remove Filter Set
Rip Options...
Return/Enter accepts * Tab toggles * ESC cancels.
•
Toggle Address Translation Enabled to Yes.
•
Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.
WAN
Configuration
IP Parameters (Default Profile)
WAN Default
Profile
Yes
Easy-PAT List
Easy-Servers
IP Parameters