Changing Or Deleting A Vlan; Changing Or Deleting An Authentication Server Configuration - Netopia 3341-ENT Firmware User Manual

3-18 Firmware User Guide
• TOS-Priority – Use any 802.1p priority bits in the VLAN header to prioritize packets within the Gateway's
internal queues, according to DiffServ priority mapping rules. See
more information.
•
IPTOS-Promote – Write any 802.1p priority bits into the IP-TOS header bit field for received IP packets on
this port destined for this VLAN. Write any IP-TOS priority bits into the 802.1p priority bit field for tagged IP
packets transmitted from this port for this VLAN. All mappings between Ethernet 802.1p and IP-TOS are
made according to a pre-defined QoS mapping policy. See
information.
Select COMMIT and press Return. Your VLAN settings will be associated with the port you have selected.
Note:
VLAN changes require a reboot to take effect. See

Changing or Deleting a VLAN

You can change or delete a VLAN by returning to the VLAN Configuration screen and selecting Display/Change
VLAN or Delete VLAN. In either case, select the VLAN that you want to change or delete from the pop-up menu,
and press Return.
VLAN Enable:
Display/Change VLAN...
Add VLAN...
Delete VLAN...
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
Changing or Deleting an Authentication Server Configuration
You can change or delete a RADIUS or TACACS server profile by returning to the VLAN Configuration screen and
selecting Authentication Server Configuration, then Display/Change Server Profile or Delete Server Profile. In
either case, select the Server Profile that you want to change or delete from the pop-up menu, and press
Return.
VLAN Configuration
Authentication Server|
"Diffserv Options" on page 2-22
"Diffserv Options" on page 2-22
"Restarting the System" on page
+----------VLAN ID: NAME----------+
+---------------------------------+
| 10: Network A
|
|
|
|
|
|
+---------------------------------+
for
for more
11-8.
|
|
|
|
|
|
|
|