Nat Associations - Netopia 3341-ENT Firmware User Manual

4-26 Firmware User Guide

NAT Associations

Configuration of map and server lists alone is not sufficient to enable NAT for a WAN connection because map
and server lists must be linked to a profile that controls the WAN interface. This can be a Connection Profile, a
WAN Ethernet interface, a default profile, or a default answer profile. Once you have configured your map and
server lists, you may want to reassign them to different interface-controlling profiles, for example, Connection
Profiles. To permit easy access to this IP Setup functionality, you can use the NAT Associations screen.
You access the NAT Associations screen from the Network Address Translation screen.
Select NAT Associations and press Return. The NAT Associations screen appears.
Profile/Interface Name-------------Nat?-Map List Name-----Server List Name
Default Answer Profile
Easy Setup Profile
Profile 01
Profile 02
Profile 03
•
You can toggle NAT? On or Off for each Profile/Interface name. You do this by navigating to the NAT? field
associated with each profile using the arrow keys. Toggle NAT on or off by using the Tab key.
•
You can reassign any of your map lists or server lists to any of the Profile/Interfaces. You do this by
navigating to the Map List Name or Server List Name field associated with each profile using the arrow
keys. Select the item by pressing Return to display a pop-up menu of all of your configured lists.
Main
Menu
Configuration
NAT Associations
System
On my_first_map
On Easy-PAT
On my_second_map
On my_first_map
On <<None>>
Network Address
Translation (NAT)
my_servers
my_servers
my_servers
my_server_list
<<None>>