Radius Server Authentication - Netopia 3341-ENT Firmware User Manual

RADIUS server authentication

Remote Authentication...
Security Databases...
Remote Server Addr/Name:
Remote Server Secret:
Alt Remote Server Addr/Name:
Alt Remote Server Secret:
RADIUS Identifier:
RADIUS Server Authentication Port: 1812
Remote Access Privileges...
Telnet Server Port:
MAC Address Authentication...
LAN (Ethernet) IP Filter Set...
Remove Filter Set
•
You select your desired mode by using the Security Databases pop-up menu.
•
Choosing Local Only, the default, selects the local authentication database. The database consists of
between one and four username and password pairs. This requires someone seeking menu console or
command line interface configuration access to log in with a username and password when at least
one username and password pair have been configured locally in the router.
• Choosing Remote Only causes the router to ignore the local database and to authenticate users using
the configured RADIUS server.
•
Choosing Remote then Local causes the router to attempt to authenticate a user first using a RADIUS
server and then, if that fails, using the local authentication database.
•
Choosing Remote then Lcl/Ser. Only causes the router to attempt to authenticate a user first using a
RADIUS server and then, if that fails, using the local authentication database. If RADIUS authentica-
tion fails, the router will authenticate the user using the local authentication database only if the user
is accessing the menu console or CLI through the built-in serial console port.
•
Choosing Local then Remote causes the router to attempt to authenticate a user first using the local
authentication database, and then, if that fails using the configured RADIUS server.
Advanced Security Options
+---------------------------+
+---------------------------+
| Local only
| Remote only
| Remote then Local
| Remote then Lcl/Ser. Only |
| Local then Remote
+---------------------------+
Custom
23
Security 10-7
|
|
|
|