Navigating Through The Telnet Screens - Netopia 3356-ENT Getting Started Manual

• If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet
from the Start menu.
• If you connect a Macintosh computer running Classic Mac OS, you can use the NCSA Telnet program
supplied on the Netopia CD. You install NCSA Telnet by dragging the application from the CD to your hard
disk. Mac OS X users can use the Terminal application that comes with Mac OS X in the Utilities folder.

Navigating through the Telnet Screens

Use your keyboard to navigate the Netopia 4-port ADSL Router's configuration screens, enter and edit
information, and make choices. The following table lists the keys to use to navigate through the Telnet screens.
Move through selectable items in a screen or pop-up menu
Set a change to a selected item or open a pop-up menu of
options for a selected item like entering an upgrade key
Change a toggle value (Yes/No, On/Off)
Restore an entry or toggle value to its previous value
Move one item up
Move one item down
Display a dump of the device event log
Display a dump of the WAN event log
Refresh the screen
To...
Telnet-Based Management 5-3
Use These Keys...
Up, Down, Left, and Right Arrow
Return or Enter
Tab
Esc
Up arrow or Control + K
Down arrow or Control + O
Control + E
Control + F
Control + L