System Configuration Features - Netopia 3341-ENT Firmware User Manual

Chapter 3
System Configuration
This chapter describes how to use the Telnet-based management screens to access and configure advanced
features of your equipment. You can customize these features for your individual setup. These menus provide a
powerful method for experienced users to set up their Router's system configuration.
System Configuration Features
The Netopia Router's default settings may be all you need to configure. Some users, however, require advanced
settings or prefer manual control over the default selections. For these users, Netopia Firmware Version 8.7
provides many advanced system configuration options.
This section covers the following topics:
•
"IP Setup" on page 3-2
•
"Filter Sets" on page 3-2
•
"IP Address Serving" on page 3-2
• "Network Address Translation (NAT)" on
page 3-2
•
"Stateful Inspection" on page 3-3
•
"Procedure for Default Installation for ICSA
firewall certification of Small/Medium
Business Category Module (ADSL Routers)"
on page 3-48
•
"VLAN Configuration" on page 3-11
• "Date and time" on page 3-22
To access the system configuration screens, select System Configuration in the Main Menu and press Return.
•
"Wireless configuration" on page 3-23
•
"Console Configuration" on page 3-35
•
"SNMP (Simple Network Management Protocol)"
on page 3-36
• "Security" on page 3-36
•
"Upgrade Feature Set" on page 3-36
•
"Router/Bridge Set" on page 3-37
•
"IGMP (Internet Group Management Protocol)" on
page 3-39
• "Logging" on page 3-42
System Configuration 3-1