Navigating Through The Telnet Screens - Netopia 3346N-ENT Getting Started Manual

• If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet
from the Start menu.
• If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the Netopia
3346-ENT CD. You install NCSA Telnet by simply dragging the application from the CD to your hard disk.

Navigating through the Telnet Screens

Use your keyboard to navigate the Netopia 3346-ENT's configuration screens, enter and edit information, and
make choices. The following table lists the keys to use to navigate through the Telnet screens.
Move through selectable items in a screen or pop-up menu
Set a change to a selected item or open a pop-up menu of
options for a selected item like entering an upgrade key
Change a toggle value (Yes/No, On/Off)
Restore an entry or toggle value to its previous value
Move one item up
Move one item down
Display a dump of the device event log
Display a dump of the WAN event log
Refresh the screen
To...
Telnet-Based Management 5-3
Use These Keys...
Up, Down, Left, and Right Arrow
Return or Enter
Tab
Esc
Up arrow or Control + K
Down arrow or Control + O
Control + E
Control + F
Control + L