Ip Parameters (Wan Default Profile) - Netopia 4553 User Reference Manual

9-112 User's Reference Guide
IP Parameters (WAN Default Profile)
The Netopia 4553 using RFC 1483 supports a WAN default profile that permits several parameters to be
configured without an explicitly configured Connection Profile.
The procedure is similar to the procedure to bind map lists and server lists to a Connection Profile.
From the Main Menu go to the WAN Configuration screen, then the Default Profile screen. Select IP Parameters
and press Return.
Main
Menu
The IP Parameters (Default Profile) screen appears.
Address Translation Enabled:
NAT Map List...
NAT Server List...
Filter Set (Firewall)...
Remove Filter Set
Receive RIP:
Return/Enter to select <among/between> ...
I Toggle Address Translation Enabled to Yes.
WAN
Configuration
IP Parameters (Default Profile)
WAN Default
Profile
Yes
Easy-PAT List
Easy-Servers
Both
IP Parameters