Table of Contents
Advertisement
8-4 User's Reference Guide
IP parameters (default profile) screen
The IP Parameters (Default Profile) screen allows you to configure various IP parameters for DSL connections
established without an explicitly configured connection profile:
Address Translation Enabled:
Filter Set (Firewall)...
Remove Filter Set
Receive RIP:
Transmit RIP:
Return/Enter accepts * Tab toggles * ESC cancels.
The Netopia R7100 SDSL Router always acts as a DHCP client on the DSL link when using a Default Profile. The
DHCP server will supply a local IP address and subnet mask. For a DSL link, Network Address Translation (NAT)
is enabled by default in the Default Profile. For details on setting up IP Parameters see
Address Translation" on page
IP Parameters (Default Profile)
9-1.
No
Both
Off
"IP Setup and Network
Advertisement
Table of Contents
