Viewing A List Of Attached Devices - NETGEAR WGR101 Reference Manual

This screen shows the following statistics:
Table 5-1. Router Statistics Fields
Field Description
Port For each port, the screen displays:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset.
RxPkts The number of packets received on this port since reset.
Collisions The number of collisions on this port since reset.
Tx B/s The current transmission (outbound) bandwidth used.
Rx B/s The current reception (inbound) bandwidth used.
Up Time The time elapsed since this port acquired the link.
Poll Interval Specifies the intervals at which the statistics are updated in this window. Click Stop to
freeze the display.
Show Statistics action buttons are described in
Table 5-2. Show Statistics action buttons
Field Description
Set Interval Enter a time and click the button to set the polling frequency.
Stop Click the Stop button to freeze the polling information.

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Management
Reference Manual for the 54 Mbps Wireless Travel Router WGR101
Table 5-2
February 2005 (202-10034-03)
5-5