The Router's Switch - NETGEAR WGR101 Reference Manual

The Router's Switch

Figure 2-1: WGR101, Side View
The side of the 54 Mbps Wireless Travel Router WGR101 has a four-position switch. It ships in
position 1, which is used when connecting to the router as a single user. The switch position
functions are as follows:
• Switch position 1: single wireless computer only access, no configuration access
• Switch position 2: configuration and multiple wireless computer access
• Switch position 3: configuration only via Ethernet or wirelessly connected computer
• Switch position 4: unused at this time
For information about changing the switch position for multiple computers to share the 54 Mbps
Wireless Travel Router WGR101, or to configure WEP security,
Overview" in Chapter
Introduction
Reference Manual for the 54 Mbps Wireless Travel Router WGR101
3.
February 2005 (202-10034-03)
refer to "Setup Options
2-5