Table of Contents
Advertisement
•
An IP address and subnet mask
•
A gateway IP address, which is the address of the ISP's router
•
One or more domain name server (DNS) IP addresses
•
Host name and domain suffix
For example, your account's full server names may look like this:
mail.xxx.yyy.com
In this example, the domain suffix is
If any of these items are dynamically supplied by the ISP, your router automatically acquires them.
If an ISP technician configured your computer during the installation of the broadband modem, or
if you configured it using instructions provided by your ISP, you need to copy the configuration
information from your computer's Network TCP/IP Properties window or Macintosh TCP/IP
Control Panel before reconfiguring your computer for use with the router. These procedures are
described next.
Obtaining ISP Configuration Information for Windows Computers
As mentioned above, you may need to collect configuration information from your PC so that you
can use this information when you configure the WGR101 wireless travel router. Following this
procedure is only necessary when your ISP does not dynamically supply the account information.
To get the information you need to configure the router for Internet access:
On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
1.
Double-click the Network icon.
2.
The Network window opens, which displays a list of installed components.
Select TCP/IP, and then click Properties.
3.
The TCP/IP Properties dialog box opens.
Select the IP Address tab.
4.
If an IP address and subnet mask are shown, write down the information. If an address is
present, your account uses a fixed (static) IP address. If no address is present, your account
uses a dynamically-assigned IP address. Click "Obtain an IP address automatically".
Select the Gateway tab.
5.
Preparing Your Network
Reference Manual for the 54 Mbps Wireless Travel Router WGR101
xxx.yyy.com
February 2005 (202-10034-03)
.
C-19
Advertisement
Table of Contents
Troubleshooting
