Table of Contents
Advertisement
Note: If you use a wireless computer to configure WEP settings, you will be
disconnected when you click on Apply. You must then either configure your wireless
adapter to match the wireless travel router WEP settings or access the wireless travel
router from a wired computer to make any further changes.
Log in to the WGR101 at its default LAN address of
1.
name of admin and default password of password, or using whatever LAN address and
password you have set up.
Click Wireless Settings in the main menu of the WGR101.
2.
From the Authentication Type drop-down list, select WEP.
3.
Select the Encryption strength from the drop-down list.
4.
Figure 4-3.
Wireless Settings encryption options
Wireless Configuration
Reference Manual for the 54 Mbps Wireless Travel Router WGR101
February 2005 (202-10034-03)
http://192.168.0.1
with its default user
4-9
Advertisement
Table of Contents
Troubleshooting
